Line 2 in a grey roomFacility AK · AP-8BT(VII)-XL + 2 × AHP-700BBM-S5

Product flow · positions from the floor plan

1. Patties from the silo through two roof pipes, one per table
2. Centrifugal rotary tables put them in single file Ø1480 · 1638 apart
3. Exit belts and inline units to the wrapper infeeds
4. Flow wrappers, each patty in clear film AHP-700BBM-S5 · 4974 × 1280 × 1416
5. Inclines up to the two holes in the machine deck
6. Stack of 5 forms in the tube under each hole
7. Two 8-station rotary clippers take the stack, clip and seal ring Ø422 · centres 2800 / 3604
8. Clipped pouches out at 750 to weighing and metal check

The machine frame, the two rotary centres and the outfeed are measured off the floor-plan DWG; the station names and heights come from the AP-8BT drawings, the wrappers from the AHP-700BBM-S5 drawing. Pipes, tables, inline units and inclines are representative. Stack of 5 is a placeholder, and the plan symbol draws 6 cups per ring where 8 stations are shown here. Turn on X-ray to see inside.